Pen making machinery routine maintenance methods

Pen making machinery is a high-precision indexing device, if used improperly will shorten its service life and lead to a decline in the performance of the whole automation equipment, so in the use of cam indexer motor in a full understanding of its performance on the basis of mastering the correct method of use.

(1) Pay attention to the installation base

The installation surface should be flat, and if there are bruises, burrs and residual oil on the installation, it should be polished and cleared with oil stones, and then grease or anti-embroidery oil should be applied on the installation surface before installation. Because the pen machinery in the work process needs to withstand excessive workload, so the installation base should be solid and reliable.

(2) Working environment

The standard working environment temperature of the pen machinery is generally (0 ~ 40 degrees), the use of a larger ambient temperature should take the appropriate anti-rust measures.

(3) the input shaft connection

Input shaft is generally designed with a keyway, when the keyway position is aligned with the output axis direction is the indexer indexing angle reference position. The main role of the key connection is to determine the starting position of the indexer indexing angle and to withstand the impact load during transmission. Under normal operation generally do not rely on the key connection to transfer torque, and the use of other connection measures, such as the use of special expansion sleeve connection.

(4) Axial alignment in the shaft connection is very important, locking the connection part, do not leave any gap.

(5) Lubrication

Lubrication has many roles such as reducing the friction of moving parts, cooling, rust prevention, etc. If the lubricant is not selected properly, it will adversely affect the accuracy and life of the indexer, and the viscosity of the lubricant will also affect the speed of the indexer, so generally use the lubricant with the manufacturer's recommended grade and viscosity. It is prohibited to mix different brands of lubricants.

(6) Maintenance

With the extension of use time, the size gap of the input and output parts will increase, which is a normal phenomenon and should be checked and adjusted regularly. The oil quantity of lubricating oil will cause the temperature to rise and oil leakage when the oil quantity is too much, so it is necessary to maintain the proper oil quantity. In the occasion of long running time, lubricating oil should be replaced once for every 3000h of running time, and in the occasion of less running time, it is generally replaced once for 1~2 years.

How to extend the service life of machinery, which is currently most of the business and manufacturers are very concerned, concerned about a problem! Whether the buyer or seller want to use their own equipment for a longer period of time, we hope that their pen equipment durable and less breakdowns. How to do that is obviously a problem. Then good equipment you do not care, maintenance over time will be a problem, so the mechanical routine maintenance work is very important. People who often operate the machine know that no matter what the machine and equipment daily maintenance is necessary. And daily maintenance to do a good job, to extend the service life of the machine, pen machinery is the same, then the pen machinery to pay attention to the daily maintenance of those?

First of all, we start with a few aspects to analyze.

First, the plastic parts used in the material which also has a very big impact on the machinery itself.

Second, the maintenance of the operation process, must be in accordance with the operating instructions to operate. Do not operate at will, that the harm to the equipment is very large.

Third, the use of equipment after the late maintenance and maintenance.